Choose the right edge banding and trimming all-in-one machine - DTMACH KN-700

Author:

KN-700 is an edge banding and trimming all-in-one machine, has both edge banding and edge trimming functions. The edge banding part laser detection and control to cut edge banding strips, precise docking, the error is ±0.3mm,The trimming part is trimmed up and down, scraping,cleaning once completed. It is also equipped with two photoelectric sensors, one can sense the plate, and the other can sense the curved line to achieve intelligent acceleration and deceleration. It can handle both straight and curve shape boards, especially for irregular board.

Edge banding and trimming machine advantage:

Laser ranging, precise docking, docking error ±0.3mm;
It can store 20 groups of different board date, and there is no need to re-test when changing different board sizes;
2 heating devices make the edge bands and the boards fit more firmly;
2 spray devices for anti adhesion liquid to make the board cleaner;
2800ml large capacity glue pot;
More finely trimming, remove excess glue line, make the board more beautiful.

Finished product display of edge banding and trimming:

The woodworking edge banding and trimming all-in-one machine is mainly used for edge banding of curve straight linear furniture such as wardrobes, cabinets and learning desks. The material of the edge banding is mainly pvc, wood veneer, melamines, pvc, abs, arcrylic fiber, etc.

The machine is suitable for such plates: MDF, particleboard, plywood, big core board, multilayer board etc, straight and curve line edging and trimming.