Difference between KN-700 and KN-620 edge banding machine

They look the same and both can do edge banding and edge trimming. With the stacking arm, most of special shaped boards can be processed. These two features make them sufficient to meet the requirements and expectations.

Author:

As the most popular multifunctional edge banding machine, KN-700 and KN-620 have always attracted much attention. They look the same and both can do edge banding and edge trimming. With the stacking arm, most of special shaped boards can be processed. These two features make them sufficient to meet the requirements and expectations.

But what is the difference between these two machines?

The biggest difference is that KN-700 has laser sensor and the docking error can be only ±0.3mm. The error is so small that secondary processing is not necessary.

The second advantage of KN-700 is that it can reach a speed of up to 37 cm/s. Compared to the 20 m/s of the 620, it works more efficiently and more flexibly.

The 2,270mm-long folding arm of KN-700 is also its second advantage, while KN-620 is 2070mm. Therefore, KN-700 is more suitable for special-shaped large boards.

Even so, KN-620 is also perfectly capable of handling most board sizes and shapes. The feeding speed is higher than most edge banding machines.

Compared to separate edge banding and trimming machines, the all-in-one machine is convenient and space-saving.Therefore, whether it is KN-700 or KN-620, they are always the first choice of many factories.